Delta ASD-A3-0121, User Manual

Page: 68 / 603

ASDA-A3 Wiring
Revision December, 2017
3-25
3
There are various operation modes available (refer to section 6.1) and the I/O configuration
differs for each mode. The ASDA-A3 provides user-defined I/O for you to set functions according
to the application requirements. See Chapter 8 and refer to Table 8.1 DI function setting and 8.2
DO function setting. The default DI/DO signal configuration for each operation mode includes the
most commonly used functions and meets the requirements for general applications.
See the table below for the default DI signal of each control mode:
DI
Control mode
PT PR S/Sz T/Tz PT-S PT-T PR-S PR-T S-T
Default
signal
Default
signal
Default
signal
Default
signal
Default
signal
Default
signal
Default
signal
Default
signal
Default
signal
1
0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01
SON SON SON SON SON SON SON SON SON
2
0x04 0x08 0x09 0x10 0x04 0x04 0x08 0x08 -
CCLR CTRG TRQLM SPDLM CCLR CCLR CTRG CTRG
3
0x16 0x11 0x14 0x16 0x14 0x16 0x11 0x11 0x14
TCM0 POS0 SPD0 TCM0 SPD0 TCM0 POS0 POS0 SPD0
4
0x17 0x12 0x15 0x17 0x15 0x17 0x12 0x12 0x15
TCM1 POS1 SPD1 TCM1 SPD1 TCM1 POS1 POS1 SPD1
5
0x02 0x02 0x02 0x02 - - 0x14 0x16 0x16
ARST ARST ARST ARST - - SPD0 TCM0 TCM0
6 0x22 0x22 0x22 0x22 - - 0x15 0x17 0x17
NL NL NL NL SPD1 TCM1 TCM1
7 0x23 0x23 0x23 0x23 0x18 0x20 0x18 0x20 0x23
PL PL PL PL S-P T-P S-P T-P PL
8 0x21 0x21 0x21 0x21 0x21 0x21 0x21 0x21 0x21
EMGS EMGS EMGS EMGS EMGS EMGS EMGS EMGS EMGS
9 - - - - - - - - -
10 - - - - - - - - -
Note: please refer to figure C7/C8 in 3.3.3 for wiring.