Delta ASD-A3-0121, User Manual

Page: 111 / 603

Trial Operation and Panel Display ASDA-A3
4-6
Revision December, 2017
4
4.3 Status display
4.3.1 Save the setting display
When you complete the parameter setting, press the SET key to save the parameters.
The panel displays the status for one second.
Displayed symbol Description
Correctly saved the setting value (Saved).
Read-only and write-protected parameter (Read-only).
Entered the wrong password or did not enter a password (Locked).
Entered an incorrect setting value or the reserved setting value (Out of Range).
You cannot enter a value when in Servo On state (Servo On).
Changes to the parameter take effect after cycling the power to the servo drive
(Power On).
4.3.2 Display the decimal point
Displayed symbol Description
Low
Byte
High
Byte
High byte / low byte indication: this indicates the current high
byte or low byte when the data is displayed in decimal (32 bits).
Negative
Sign
No
Function
Negative sign: the two decimal points on the left represents
the negative sign when the data is displayed in decimal format,
(16 or 32 bits). In hexadecimal format, it only shows positive
values.