Delta ASD-A3-0121, User Manual

Page: 271 / 603

Parameters ASDA-A3
8-14
Revision December, 2017
8
P0.003 Analog output monitoring
Address: 0006H
0007H
Default: 0x0000 Control mode: All
Unit:
-
Setting range: 0 – 77
Format: HEX Data size: 16-bit
Settings:
X Y UZ

X: MON2

Y: MON1

UZ: reserved
MON1 and MON2
value
Description
MON1 and MON2
value
Description
0
Motor speed
(+/- 8 volts / Maximum
speed)
4
Torque command
(+/- 8 volts / Maximum
Torque command)
1
Motor torque
(+/- 8 volts / Maximum
torque)
5
VBUS voltage
(+/- 8 volts / 450V)
2
Pulse command frequency
(+8 volts / 4.5 Mpps)
6 Reserved
3
Speed command
(+/- 8 volts / Maximum
Speed command)
7 Reserved
Note: please refer to parameters P1.004 and P1.005 for the proportional setting for the analog voltage output.
For example: when you set P0.003 to 01 (MON1 is the analog output of motor speed; MON2 is the analog
output of motor torque):
MON1 output voltage =
8 x
Motor speed
( Maximum speed x
P1 . 004
100
)
(Unit: volts)
MON2 output voltage = 8 x
Motor torque
( Maximum torque x
P1 . 005
100
)
(Unit: volts)
P0.004 –
P0.007
Reserved