Delta ASD-A3-0121, User Manual

Page: 277 / 603

Parameters ASDA-A3
8-20
Revision December, 2017
8
P0.035 Target setting for mapping parameter P0.025
Address: 0046H
0047H
Default: - Control mode: All
Unit: - Setting range: Determined by the communication
address of the parameter group
Format: HEX Data size: 32-bit
Settings:
The formats of the high-bit parameter (PH) and the low-bit parameter (PL) are:
BA C D
YX Z U
BA
Hexadecimal code for the parameter
index
YX Hexadecimal code for the parameter
index
C
Hexadecimal code for the parameter
group
Z
Hexadecimal code for the parameter
group
D N/A U N/A
h High-bit L Low-bit
Select the data block to access the parameter correspondingto register 1. The mapping value is
32 bits and can map to two 16-bit parameters or one 32-bit parameter.
P0.035: (Mapping parameter: P0.035; Mapping content: P0.025)
Set the P parameter
to be mapped for
P0.025 high bit
P0 . 035
Map the P parameter
value set by P0.035
high bit
P0. 025
Set the P parameter
to be mapped for
P0.025 low bit
Map the P parameter
value set by P0.035
low bit
1. When PH does not equal PL, it indicates that the content of P0.025 includes two 16-bit parameters.
Example: Target: set P2.003 to 0 in the mapping parameter and set P2.005 to 100.
Setting: set the P0.035 high bit to 0203 (P2.003) and low bit to 0205 (P2.005).
Thus, P0.035 = 0x02030205.
P2.003 P2.005
P0.035
Write: in the mapping content, set P0.025 to 0x00050064, and the values of P2.003 and
P2.005 are:
P0. 025
0005 0064
P2.003
0005
P2.005
0064