Dell PowerConnect W-7200 Series, Reference Manual

Page: 848 / 1538

848 | show ap remote debug flash-config Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show ap remote debug flash-config
show ap remote debug flash-config {ap-name <ap-name>|bssid <bssid>|ip-addr <ip-addr>} acls|
{vap <vap>|vaps
Description
Show the remote AP configuration stored in flash memory.
Syntax
Parameter Description
ap-name <ap-name>
Show debugging data for an AP with a specific name.
bssid <bssid> Show data for a specific Basic Service Set Identifier (BSSID) on an AP. The Basic Service
Set Identifier (BSSID) is usually the AP’s MAC address.
ip-addr <ip-addr>
Show data for an AP with a specific IP address by entering its IP address in dotted-decimal
format.
acls Display ACLs of offline Virtual APs (VAPs).
vap <vap>
Display the configuration of a specific offline VAP by entering the name of an VAP.
vaps
Display the current number of offline VAPs.
Example
The output of this command can be used to debug problems with a remote AP. The command below shows
statistics for an AP with the IP address
192.0.2.64.
(host) #show ap remote debug flash-config ip-addr 192.0.2.64 acls
Offline ACLs
------------
Item Value
---- -----
Native VLAN 1
DHCP VLAN N/A
DHCP ADDR 192.168.11.1
DHCP POOL NETMASK 255.255.255.0
DHCP POOL START 192.168.11.2
DHCP POOL END 192.168.11.254
DHCP DNS SERVER 0.0.0.0
DHCP ROUTER 192.168.11.1
DHCP DNS DOMAIN mycompany
DHCP LEASE 0
Session ACL N/A
Session ACL Name N/A
Session ACL Count N/A
Session Aces N/A
ACL 1 1
ACL 1 Name logon
ACL 1 Count 21
Aces 1 16 1 4294
...