Dell PowerConnect W-7200 Series, Reference Manual

Page: 781 / 1538

show ap mesh active
show ap mesh active [<mesh-cluster>|{page <page>}|{start <start>}]
Description
Show active mesh cluster APs currently registered on this controller.
Syntax
Parameter Description
<mesh-cluster>
Name of a mesh cluster profile.
page <page>
Limit the output of this command to a specific number of entries by entering the number of
entries you want to display.
start <start>
Start displaying the index of mesh APs at a chosen index number by entering the index
number of the AP at which command output should start.
Examples
The output of this command displays a list of all active mesh points and mesh portals.
(host) #show ap mesh active
Mesh Cluster Name: meshprofile1
------------------------------
Name Group IP Address BSSID Band/Ch/EIRP/MaxEIRP MTU Enet 0/1
Mesh Role
---- ----- ---------- ----- -------------------- --- --------
---------
mp1 mp1 10.3.148.245 00:1a:1e:85:c0:30 802.11a/157/19/36 Off/Off
Point
mp2 mp2 10.3.148.250 00:1a:1e:88:11:f0 802.11a/157/19/36
Bridge/Bridge Point
mp3 mp3 10.3.148.253 00:1a:1e:88:01:f0 802.11a/157/19/36 Bridge/Bridge
Point
mpp mpp125 10.3.148.252 00:1a:1e:88:05:50 802.11a/157/19/36 1578 -/Bridge
Portal
Parent #Children AP Type Uptime
------ --------- ------- ------
mp3 0 125 13d:2h:25m:19s
mpp 1 125 14d:21h:23m:49s
mp2 1 125 14d:21h:14m:55s
- 1 125 14d:19h:5m:3s
The output of this command includes the following information:
Column Description
Name
Name of an AP.
Group
AP group which includes the specified AP.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show ap mesh active | 781