Dell PowerConnect W-7200 Series, Reference Manual

Page: 1354 / 1538

1354 | show whitelist-db cpsec-status Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show whitelist-db cpsec-status
show whitelist-db cpsec-status
Description
Display aggregate status information APs in the campus AP whitelist.
Syntax
No parameters.
Example
The output of the following command shows current status information for all APs in the campus AP whitelist:
(host) #show whitelist-db cpsec cpsec-status
Entries in Whitelist database
Total entries: 41
Approved entries: 0
Unapproved entries: 0
Certified entries: 40
Certified hold entries: 0
Revoked entries: 1
Marked for deletion entries: 0
(Host) #
The output of this command includes
Syntax
Parameter Description
Total entries
Total number of entries in the campus AP whitelist
Approved entries:
Number of APs that are valid, but is waiting to receive a certificate.
Unapproved entries Number of APs that have certificate that was not not approved.
Certified entries
Number of APs that have an approved certificate.
Certified hold entries
Number of APs in the certified hold state. An AP is put in this state when the
controller thinks the AP a certified certificate yet the AP requests to be certified
again. Since this is not a normal condition, the AP will not be reapproved as a secure
AP until a network administrator manually changes the status of the AP to verify that it
is not compromised.
Revoked entries
Number of APs whose entries have been revoked
Marked for deletion
entries Number of APs whose entries have been marked for deletion. An entry will not be
permanently deleted until all other controllers on the network acknowledge the
deletion.