Dell PowerConnect W-7200 Series, Reference Manual

Page: 1286 / 1538

1286 | show threshold Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show threshold
show threshold
all|controlpath-cpu|controlpath-memory|datapath-cpu|
no-of-aps|no-of-locals|total-tunnel-capacity|user-capacity|
Description
This command shows controller capacity thresholds which, when exceeded, will trigger alerts.
Syntax
Parameter Description
all
Display all alert thresholds.
controlpath-cpu Display the alert threshold for controlpath CPU capacity. The output of this command shows
the percentage of the total controlpath CPU capacity that must be exceeded before the alert
is sent.
The default threshold for this parameter is 80%.
controlpath-memory
Display the alert threshold for controlpath memory consumption. The output of this
command shows the percentage of the total memory capacity that must be exceeded before
the alert is sent.
The default threshold for this parameter is 85%.
datapath-cpu
Display the alert threshold for datapath CPU capacity. The output of this command shows
the percentage of the total datapath CPU capacity that must be exceeded before the alert is
sent.
The default threshold for this parameter is 30%.
no-of-APs
The maximum number of APs that can be connected to a controller is determined by that
controller’s model type and installed licenses. This threshold triggers an alert when the
number of APs currently connected to the controller exceeds a specific percentage of its
total AP capacity.
The default threshold for this parameter is 80%.
no-of-locals
Display the alert threshold for the master controller’s capacity to support remote nodes and
local controllers.
A master controller can support a combined total of 256 remote nodes and local controllers.
The output of this command shows the percentage of the total master controller capacity
that must be exceeded before the alert is sent. The default threshold for this parameter is
80%.
total-tunnel-capacity Display the alert threshold for the controller’s tunnel capacity. The output of this command
shows the percentage of the controller’s total tunnel capacity that must be exceeded before
the alert is sent.
The default threshold for this parameter is 80%
user-capacity Display the alert threshold for the controller’s user capacity. The output of this command
shows the percentage of the total resource capacity that must be exceeded before the alert
is sent.
The default threshold for this parameter is 80%.