Dell PowerConnect W-7200 Series, Reference Manual

Page: 1288 / 1538

1288 | show threshold-limits Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show threshold-limits
show threshold-limits
controlpath-memory|fan-speed|no-of-aps|no-of-locals|total-tunnel-capacity|user-capacity
Description
This command shows current values of the different resources monitored by the controller.
Syntax
Parameter Description
controlpath-memory
The output of this command displays the default memory threshold which, when exceeded,
will trigger an alert, the current configured threshold, the total memory (in MB) and the
currently available memory (in MB).
fan-speed
The output of this command displays the fan alert threshold. This parameter is only available
for controllers with fans, such as the W-6000M3 and W-7200 series.
no-of-aps
The output of this command displays the following values:
l
The default threshold for the number of APs, which, when exceeded, will trigger an
alert
l
The current configured threshold.
l
The maximum number of APs supported by the controller,
l
The number of available licenses for campus and remote APs,
l
The total number of APs, and the current number of campus, remote and virtual APs.
no-of-locals The output of this command displays the default threshold for the number of local con-
trollers which, when exceeded, will trigger an alert, and the current configured threshold.
The output also displays the maximum number of local controllers that can be connected to
this master controller, and the number of local controllers currently connected.
total-tunnel-capacity The output of this command displays the default tunnel capacity threshold which, when
exceeded, will trigger an alert, as well as the current configured tunnel threshold. The out-
put also includes the maximum number of tunnels supported by the controller, as well as
the number of tunnels currently used by the controller.
user-capacity The output of this command displays the default user capacity threshold which, when
exceeded, will trigger an alert, as well as the current configured user threshold. The output
also includes the maximum number of users supported by the controller, as well as the
number of users currently associated with the controller.
Usage Guidelines
The controller will send a wlsxThresholdAbove SNMP trap and a syslog error message when the controller has
exceeded a set percentage of the total capacity for that resource. A wlsxThresholdBelow SNMP trap and error
message will be triggered if the resource usage drops below the threshold once again.
Example
The following command shows the current alert thresholds for all monitored controller resources:
(host) (config) #show threshold all
Controller Capacity Threshold Values
------------------------------------