Dell PowerConnect W-7200 Series, Reference Manual

Page: 777 / 1538

show ap lldp neighbors
show ap lldp neighbors
ap-name <ap-name>
ip-addr <ip-addr>
ip6-addr (ipv6-addr>
Description
Show LLDP neighbors for a specific AP, or all APs sending or receiving LLDP Protocol Data Units (PDUs).
Syntax
Parameter Description
ap-name <ap-name>
Show LLDP neighbor statistics for an AP with a specific name.
ip-addr <ip-addr> View LLDP neighbor statistics for an AP with a specific IP address. Enter the IP address of
the AP in dotted-decimal format.
ip6-addr <ip-addr>
View LLDP neighbor statistics for an AP with a specific IPv6 address.
Usage Guidelines
The LLDP protocol allows switches, routers, and wireless LAN access points to advertise information about
themselves such as identity, capabilities, and neighbors to other nodes on the network. Use this command to display
information about the AP’s LLDP peers.
By default, this command displays LLDP neighbors for the entire list of LLDP interfaces. Include a the name of IP
address of an AP to display neighbor information only for that one device.
Examples
The output of the command below shows the LLDP neighbor list for an AP named ap12 .
(host) show ap lldp neighbors ap-name ap12
AP LLDP Neighbors (Updated every 60 seconds)
--------------------------------------------
AP Interface Neighbor Chassis Name/ID Port Name/ID Mgmt. Address Capabilities
-- --------- -------- --------------- ------------ ------------- ------------
uc bond0 0 d8:c7:c8:c4:4f:4e bond0 10.3.44.193
Capability codes: (R)Router, (B)Bridge, (A)Access Point, (P)Phone, (O)Other
The output of this command includes the following information:
Parameter Description
AP Name of the LLDP neighbor
Interface
Interface on the AP sending or receiving LLDP PDUs.
Neighbor
LLDP neighbor number
Chassis Name/ID
The name of the LLDP neighbor AP
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show ap lldp neighbors | 777