Dell PowerConnect W-7200 Series, Reference Manual

Page: 127 / 1538

ap mesh-cluster-profile
ap mesh-cluster-profile <profile>
clone <profile>
cluster <name>
no ...
opmode [opensystem | wpa2-psk-aes]
rf-band {a | g}
wpa-hexkey <wpa-hexkey>
wpa-passphrase <wpa-passphrase>
Description
This command configures a mesh cluster profile used by mesh nodes.
Syntax
Parameter Description Range Default
<profile>
Name of this instance of the profile. The name must be 1-
63 characters. — “default”
clone
Name of an existing mesh cluster profile from which
parameter values are copied. — —
cluster
Indicates the mesh cluster name. The name can have a
maximum of 32 characters, and is used as the MSSID for
the mesh cluster. When you first create a new mesh
cluster profile, the profile uses the default cluster name
“Dell-mesh”. Use the cluster parameter to define a new,
unique MSSID before you assign APs or AP groups to the
mesh cluster profile.
NOTE: If you want a mesh cluster to use WPA2-PSK-AES
encryption,
do not use spaces in the mesh cluster name,
as this may cause errors in mesh points associated with
that mesh cluster.
To view existing mesh cluster profiles, use the CLI
command
show ap mesh-cluster-profile .
— “Dell-mesh”
no
Negates any configured parameter. — —
opmode
Configures one of the following types of data encryption.
l
opensystem—No authentication or encryption.
l
wpa2-psk-aes—WPA2 with AES encryption using a
pershared key.
Best practices are to select wpa2-psk-aes and use the
wpa-passphrase parameter to select a passphrase. Keep
the passphrase in a safe place.
opensystem
wpa2-psk-aes opensystem
rf-band
Configures the RF band in which multiband mesh nodes
should operate:
a = 5 GHz
g = 2.4 GHz
Best practices are to use 802.11a radios for mesh
deployments. a
g a
wpa-hexkey
Configures a WPA pre-shared key. — —
wpa-passphrase
Sets the WPA password that generates the PSK. — —
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide ap mesh-cluster-profile | 127