4 9418D500000E
©
Copyright 2016 Axiomtek Co., Ltd.
Version A1 June 2016
Printed in Taiwan
Quick Start
The basic procedures required to power on CEM500:
(1). Make sure the power is OFF before connecting the CEM500.
(2). Check to ensure the onboard switch SW1-1 is set to default (OFF
position).
(3). Firmly install DDR4 SO-DIMM in DIMM1/DIMM2 until fully seated. For
single memory channel configuration, install memory module in
channel 0 (DIMM1) DDR4 SO-DIMM socket. For dual memory
channel configuration, install memory modules of the same size, chip
width, density and rank in both channel 0 (DIMM1) and channel 1
(DIMM2) DDR4 SO-DIMM sockets.
Note: It must be DDR4 memory module.
(4). Attach heatsink to the CEM500, refer to section Installing Heatsink.
(5). Install the CEM500 onto COM Express
TM
baseboard, for example,
CEB94006 baseboard.
(6). Properly install all necessary peripheral devices such as hard disk,
display, keyboard and etc. to the baseboard.
(7). Firmly attach power supply to the baseboard’s power connector.
(8). Turn on the system power.
CEM500 Quick Installation Guide
9418D500000E 1
©
Copyright 2016 Axiomtek Co., Ltd.
Version A1 June 2016
Printed in Taiwan
Checklist
CEM500 Board x1
Product Information CD x1
Quick Installation Guide x1
Note: Please contact your local vendors if any damaged or missing items. DO
NOT apply power to the board if there is any damaged component.
Please refer to the product information CD for the complete user’s
manual, drivers and utilities. User’s manual and related documents are
in Acrobat PDF format.
Module Layout
Top View
CEM500 COM Express
TM
Ty
pe
6 Basic
Module