Dell PowerConnect W-7200 Series, Reference Manual

Page: 1293 / 1538

show uplink
crypto-local
show uplink [config|{connection <link_id>}|signal|{stats <link_id}]
Description
Displays uplink configuration details on an W-600 series controller.
Syntax
Parameter Description
config
Enter the keyword config to display the uplink manager, the default wired priority
and default cellular priority
connection Enter the keyword connection followed by the uplink ID number to display the
connection details.
signal
Enter the keyword signal to display the cellular uplink signal strength.
stats
Enter the keyword stats followed by the uplink ID number to display the statistical
information on the designated uplink.
Example
The output of this command displays the controller uplink status .
(host) ##show uplink
Uplink Manager: Enabled
Uplink Management Table
-----------------------
Id Uplink Type Properties Priority State Status
-- ----------- ---------- ------- ----- ------
1 Wired vlan 1 200 Initializing Waiting for link
2 Cellular Novatel_U727 100 Standby Ready
Command History
Introduced in ArubaOS 3.4.
Command Information
Platforms Licensing Command Mode
W-600 series controllers Base operating system Config mode on master and local controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show uplink | 1293