Dell PowerConnect W-7200 Series, Reference Manual

Page: 1377 / 1538

Parameter Description
the AP. This does not affect third-party APs.
HA Discovery on-association
If enabled, home agent discovery is triggered on client association
instead of home agent discovery based on traffic from client. Mobility
on association can speed up roaming and improve connectivity for
clients that do not send many uplink packets to trigger mobility (VoIP
clients). Best practices is to leave this parameter disabled as it
increases IP mobility control traffic between controllers in the same
mobility domain. Enable this parameter only when voice issues are
observed in VoIP clients.
NOTE:
ha-disc-onassoc
parameter works only when IP mobility
is enabled and configured on the controller.
Mobile IP
Shows if the profile has enabled or disabled IP mobility.
Preserve Client VLAN
This parameter allows clients to retain their previous VLAN assign-
ment if the client disassociates from an AP and then immediately re-
associates either with same AP or another AP on same controller.
Remote-AP Operation
Shows how the virtual AP operates on a remote AP:
l
always: Permanently enables the virtual AP.
l
backup: Enables the virtual AP if the remote AP cannot connect to
the controller.
l
persistent: Permanently enables the virtual AP after the remote
AP initially connects to the controller.
l
standard: Enables the virtual AP when the remote AP connects to
the controller.
Station Blacklisting Shows if the profile has enabled or disabled detection of denial of
service (DoS) attacks, such as ping or SYN floods, that are not
spoofed deauth attacks.
Strict Compliance
If enabled, the AP denies client association requests if the AP and
client station have no common rates defined. Some legacy client
stations which are not fully 802.11-compliant may not include their
configured rates in their association requests. Such non-compliant
stations may have difficulty associating with APs unless strict
compliance is disabled.
Multi Association
If enabled, this feature allows a station to be associated to multiple
APs. If this feature is disabled, when a station moves to new AP it will
be de authorized by the AP to which it was previously connected,
deleting station context and flushing key caching information
Fast Roaming
Shows if the AP has enabled or disabled fast roaming.
VLAN Mobility
Shows if the AP has enabled or disabled VLAN (Layer-2) mobility.
WMM Traffic Management Profile
WMM Traffic Management Profile associated with this Virtual AP
Profile
Command History
This command was introduced in ArubaOS 3.0.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show wlan virtual-ap | 1377