Dell PowerConnect W-7200 Series, Reference Manual

Page: 665 / 1538

show ap ap-group
show ap ap-group {ap-name <ap-name>|bssid <bssid>|ip-addr <ip-addr>}
Description
Show the AP group settings for an individual AP.
Syntax
Parameter Description
ap-name <ap-name>
Show data for an AP with a specific name.
bssid <bssid>
Show data for a specific Basic Service Set Identifier (BSSID). An AP’s BSSID is usually the
AP’s MAC address.
ip-addr <ip-addr>
Show data for an AP with a specific IP address. Enter the IP address in dotted-decimal
format.
Usage Guidelines
Use this command to display the contents of an AP's group profile. If you know the name of the group whose profile
settings you want to view, use the command
show ap-group <profile-name> . To view a list of all configured AP
groups on your controller, use the command show ap-group .
Examples
In the example below, the output of this command lists the profiles associated with the AP group Corp13 .
(host) #show ap ap-group AP2
AP group "corp13"
-------------------
Parameter Value
--------- -----
Virtual AP corp13-guest
Virtual AP corp13-ether-wpa2
Virtual AP corp13-ether-voip
Virtual AP corp13-ether-comm
802.11a radio profile default
802.11g radio profile default
Wired AP profile default
Ethernet interface 0 link profile default
Ethernet interface 1 link profile default
AP system profile corp13
VoIP Call Admission Control profile default
802.11a Traffic Management profile N/A
802.11g Traffic Management profile N/A
Regulatory Domain profile corp13-channel-profile
SNMP profile default
RF Optimization profile handoff-aggressive
RF Event Thresholds profile default
IDS profile ids-low-setting
Mesh Radio profile default
Mesh Cluster profile N/A
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show ap ap-group | 665