Dell PowerConnect W-7200 Series, Reference Manual

Page: 174 / 1538

174 | cellular profile Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
cellular profile
cellular profile <profile_name>
dialer <group>
driver acm|hso|option|sierra
import <address>
modeswitch {eject <params>}|rezero
no
priority <1-255>
serial <sernum>
tty <ttyport>
user <login> password <password>
vendor <vend_id> product <prod_id>
Description
Create new profiles to support new USB modems or to customize USB characteristics.
Syntax
Parameter Description
cellular profile <profile_name>
Enter the keywords cellular profile followed by your profile name.
This command changes the configuration mode and the command
line prompt changes to:
host (config-cellular <profile_name>)#
dialer <group>
Enter the keyword dialer followed by a group name to specify the
dialing parameters for the carrier. The parameters tend to be
common between service providers on the same type of network
(CDMA vs. GSM) as displayed in the
show dialer group
command.
driver acm|hso|option|sierra
Enter the keyword driver followed by one of the driver options:
l
acm: Linux ACM driver.
l
hso: Option High Speed driver.
l
option: Option USB data card driver (default).
l
sierra: Sierra Wireless driver.
import <address> Enter the keyword import followed by the USB device address as
displayed in the
show usb command. Import retrieves the
vendor/product serial numbers from the USB device list and
populates them into the profile.
modeswitch {eject <params>}|rezero Enter the keyword modeswitch followed by either:
l
eject followed by the CDROM device.
l
rezero: Send SCSI CDROM rezero command.
Certain cellular devices must be modeswitched before the modem
switches to data mode.
no Enter the keyword no to negate the command and revert back to the
defaults.
priority <1-255>
Enter the keyword priority to override the default cellular priority
(100).
Range: 1 to 255.
Default: 100