Dell PowerConnect W-7200 Series, Reference Manual

Page: 360 / 1538

360 | ip dhcp pool Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
ip dhcp pool
ip dhcp pool <name>
default-router <ipaddr> ...
dns-server {<ipaddr> ... |import}
domain-name <name>
lease <days> <hours> <minutes>
netbios-name-server {<ipaddr> ... |import}
network <ipaddr> {<netmask>|<prefix>}
no ...
option <code> ip <ipaddr>
pooltype ipupsell|private|public
vendor-class-identifier
Description
This command configures a DHCP pool on the controller.
Syntax
Parameter Description
default-router
IP address of the default router for the DHCP client. The client should be on the same
subnetwork as the default router. You can specify up to eight IP addresses.
dns-server
IP address of the DNS server, which can be one of the following:
<address>
IP address of the DNS server. You can specify up to eight IP addresses.
import
Use the DNS server address obtained through PPPoE or DHCP.
domain-name Domain name to which the client belongs.
lease
The amount of time that the assigned IP address is valid for the client. Specify the lease in
<days> <hours> <minutes>.
netbios-name-
server
IP address of the NetBIOS Windows Internet Naming Service (WINS) server, which can be
one of the following:
<address>
IP address of the WINS server. You can specify up to eight IP addresses.
import
Use the NetBIOS name server address obtained through PPPoE or DHCP.
network
Range of addresses that the DHCP server may assign to clients, in the form of <ipaddr> and
<netmask> or <ipaddr> and <prefix> (/n).
no
Negates any configured parameter.
option
Client-specific option code and IP address. See RFC 2132, “DHCP Options and BOOTP
Vendor Extensions”.
pooltype Configure one of the following DHCP Pool types
l
ipupsell: Configure the DHCP pool as an IP upsell pool
l
private: Configure the DHCP pool as private
l
public: Configure the DHCP pool as public
vendor-class-
identifier
Send the ArubaAP vendor ID to clients.