Dell PowerConnect W-7200 Series, Reference Manual

Page: 789 / 1538

show ap mesh debug forwarding-table
show ap mesh forwarding-table {ap-name <ap-name>}|{ip-addr <ip-addr>}
Description
Show the forwarding table for a remote mesh point or remote mesh portal.
Syntax
Parameter Description
ap-name <ap-name>
Show data for a remote mesh node with a specific name.
ip-addr <ip-addr>
Show data for a remote mesh node with a specific IP address by entering its IP address in
dotted-decimal format.
Usage Guidelines
This is an internal technical support command. Dell technical support may request that you issue this command to
help analyze and troubleshoot problems with your mesh network.
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms This show command is available in
the base operating system.
Commands to configure the mesh
feature require the Mesh license. Enable or Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show ap mesh debug forwarding-table | 789