Dell PowerConnect W-7200 Series, Reference Manual

Page: 565 / 1538

Parameter Value
Framed MTU Shows the framed MTU attribute sent to the
authentication server.
Number of times ID-Requests are retried
Maximum number of times ID requests are sent to
the client.
Maximum Number of Reauthentication Attempts Maximum number of reauthentication attempts.
Maximum number of times Held State can be
bypassed
Number of consecutive authentication failures
which, when reached, causes the controller to not
respond to authentication requests from a client
while the controller is in a held state after the
authentication failure.
Dynamic WEP Key Message Retry Count
Number of times unicast/multicast EAPOL key
messages are sent to the client.
Dynamic WEP Key Size Dynamic WEP key size, either 40 or 128 bits.
Interval between WPA/WPA2 Key Messages
Interval, in milliseconds, between each WPA key
exchange.
Delay between EAP-Success and WPA2 Unicast Key
Exchange
Show the delay interval between EAP-Success and
unicast key exchanges, in msec.
Range: 0-2000msec. Default: 0 (no delay).
Delay between WPA/WPA2 Unicast Key and Group
Key Exchange
Interval, in milliseconds, between unicast and
multicast key exchanges.
Time interval after which the PMKSA will be
deleted Show the PMKSA cache interval. Time interval in
Hours. Range: 1-2000. Default: 8 hrs.
WPA/WPA2 Key Message Retry Count
Number of times WPA/WPA2 key messages are
retried.
Multicast Key Rotation Shows if multicast key rotation is enabled or
disabled.
Unicast Key Rotation
Shows if unicast key rotation is enabled or disabled.
Reauthentication
If enabled, this option forces the client to do a 802.1X
reauthentication after the expiration of the default
timer for reauthentication. (The default value of the
timer is 24 hours.)
Opportunistic Key Caching
If enabled, a cached pairwise master key (PMK) is
derived with a client and an associated AP and used
when the client roams to a new AP.
Validate PMKID
Shows if the Validate PMKID feature is enabled or
disabled. When this option is enabled, the client
must send a PMKID in the associate or reassociate
frame to indicate that it supports OKC; otherwise, full
802.1X authentication takes place. (This feature is
optional, since most clients that support OKC do not
send the PMKID in their association request.)
Use Session Key
If enabled, the controller will use a RADIUS session
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show aaa authentication dot1x | 565