Dell PowerConnect W-7200 Series, Reference Manual

Page: 823 / 1538

show ap provisioning
show ap provisioning {ap-name <ap-name>}|{bssid <bssid>}|{ip-addr <ip-addr>}
Description
Show provisioning parameters currently used by an AP.
Syntax
Parameter Description
ap-name <ap-name>
Show data for an AP with a specific name.
bssid <bssid>
Show data for a specific Basic Service Set Identifier (BSSID) on an AP. An AP’s BSSID is
usually the AP’s MAC address.
ip-addr <ip-addr>
Show data for an AP with a specific IP address.
Example
The output of this command shows that the AP named AP8 has mostly default parameters. These
appear with the value N/A.
(host) #show ap provisioning ap-name AP8
AP "mp2" Provisioning Parameters
--------------------------------
Item Value
---- -----
(host) (config) #show ap provisioning ap-name 00:24:6c:c7:d5:c8
AP "00:24:6c:c7:d5:c8" Provisioning Parameters
----------------------------------------------
Item Value
---- -----
AP Name 00:24:6c:c7:d5:c8
AP Group default
Location name N/A
SNMP sysLocation N/A
Master 10.4.62.9
Gateway N/A
IPv6 Gateway N/A
Netmask N/A
IP Addr N/A
IPv6 Addr N/A
IPv6 Prefix 64
DNS IP N/A
DNS IPv6 N/A
Domain Name N/A
Server Name aruba-master
Server IP 10.4.62.9
Antenna gain for 802.11a N/A
Antenna gain for 802.11g N/A
Antenna for 802.11a both
Antenna for 802.11g both
Single chain mode for Radio 0 0
Single chain mode for Radio 1 0
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show ap provisioning | 823