Dell PowerConnect W-7200 Series, Reference Manual

Page: 838 / 1538

838 | show ap remote counters Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show ap remote counters
show ap remote counters {ap-name <ap-name>}|{bssid <bssid>}|{ip-addr <ip-addr>}
Description
Show the numbers of message counters for Remote APs
Syntax
Parameter Description
ap-name <ap-name>
Show data for an AP with a specific name.
bssid <bssid>
Show data for a specific Basic Service Set Identifier (BSSID) on an AP. You must specify an
AP’s BSSID, which is usually the AP’s MAC address
ip-addr <ip-addr>
Show data for an AP with a specific IP address.
Examples
Use this command to determine the number of message counters recorded for each counter type seen by the remote
AP. The output of the command in the example below shows counters for Remote AP State and VoIP CAC State
Announcements.
(host) #show ap remote counters ap-name al22
Counters
--------
Name Value
---- -----
Remote AP State 62851
VoIP CAC State Announcement 13605
The output of this command includes the following information:
Column Description
Name
Name of the counter type.
Value
Number of counters recorded since the AP was last reset.
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master controllers