Dell PowerConnect W-7200 Series, Reference Manual

Page: 591 / 1538

show aaa authentication-server all
show aaa authentication-server all
Description
View authentication server settings for both external authentication servers and the internal controller database.
Usage Guidelines
The output of this command displays statistics for the Authentication Server Table, including the name and
address of each server, server type and configured authorization and accounting ports.
Examples
The following command shows information for the internal Authentication server, and another RADIUS server
named RADIUS-1.
(host) #show aaa authentication-server all
Auth Server Table
-----------------
Name Type FQDN IP addr AuthPort AcctPort Status Requests
---- ---- ---- ------- -------- -------- ------ --------
Internal Local n/a 10.4.62.11 n/a n/a Enabled 0
server Ldap n/a 0.0.0.0 389 n/a Enabled 0
server Radius SRVR1 127.9.9.61 1812 1813 Enabled 0
default Tacacs n/a 127.9.10.61 49 n/a Enabled 0
The following data columns appear in the output of this command:
Parameter Description
Name Name of the authentication server.
Type The type of authentication server. ArubaOS supports LDAP, RADIUS and servers,
in addition to its own local, internal authentication server.
FQDN The Fully-Qualified Domain Name of the server, if configured.
IP addr IP address of the server, in dotted-decimal format.
AuthPort Port number used for authentication. An LDAP server uses port 636 for LDAP over SSL, and
port 389 for SSL over LDAP, Start TLS operation andclear text. The default RADIUS
authentication port is port 1812.
AcctPort Accounting port on the server. The default RADIUS accounting port is port 1813.
AcctPort Accounting port on the server.
Status Shows whether the Authentication server is enable or disabled.
Requests Number of authentication requests received by the server.
Command History
This command was introduced in ArubaOS 3.0.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show aaa authentication-server all | 591