Dell PowerConnect W-7200 Series, Reference Manual

Page: 790 / 1538

790 | show ap mesh debug hostapd-log Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show ap mesh debug hostapd-log
show ap mesh debug hostapd-log {ap-name <ap-name>}|{bssid <bssid>}|{ip-addr <ip-addr>}
Description
Show the debug log messages for the hostapd process.
Syntax
Parameter Description
ap-name <ap-name>
Show data for an AP with a specific name.
bssid <bssid>
Show data for a specific Basic Service Set Identifier (BSSID) on an AP. The Basic Service
Set Identifier (BSSID) is usually the AP’s MAC address.
ip-addr <ip-addr>
Show data for an AP with a specific IP address by entering an IP address in dotted-
decimal format.
Usage Guidelines
This is an internal technical support command. Dell technical support may request that you issue this command to
help analyze and troubleshoot problems with the
hostapd process or your mesh network.
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms This show command is available in
the base operating system.
Commands to configure the mesh
feature require the Mesh license. Enable or Config mode on master controllers