Dell PowerConnect W-7200 Series Reference Manual Download Page 491

Page: 491 / 1538

4. Use the provision-ap options to set new values. Use the

show provisioning-params

command to display

parameters and values in the provisioning-params workspace. Use the

clear provisioning-params

command to

reset the workspace to default values.

5. Use the

reprovision

option to provision the AP with the values in provisioning-params workspace. The AP

automatically reboots.

Provisioning Multiple APs at a Time

You can change parameter values for multiple APs at a time, however, note the following:

You cannot provision the following AP-specific options on multiple APs:

ap-name

ipaddr

pap-user

pap-passwd

ikepsk

If any of these options are already provisioned on the AP, their values are retained when the AP is
reprovisioned.

The values of the server-name, a-ant-gain, or g-ant-gain options are retained if they are not reprovisioned.

All other values in the provisioning-params workspace are copied to the APs.

To provision multiple APs at the same time:

1. Use the

read-bootinfo

to read the current information from each deployed AP that you wish to provision.

NOTE: The AP parameter values are written to the provisioning-ap-list. To reprovision multiple APs, the APs must be present in the

provisioning-ap-list. Use the show provisioning-ap-list command to see the APs that will be provisioned. Use the clear provisioning-

ap-list command to clear the provisioning-ap-list.

2. Use the

copy-provisioning-params

option to copy an AP’s parameter values to the provisioning-params

workspace.

3. Use the provision-ap options to set new values. Use the

show provisioning-params

command to display

parameters and values in the provisioning-params workspace. Use the

clear provisioning-params

command to

reset the workspace to default values.

4. Use the

reprovisionall

option to provision the APs in the provisioning-ap-list with the values in provisioning-

params workspace. All APs in the provisioning-ap-list automatically reboot.

The following are useful commands when provisioning one or more APs:

show|clear provisioning-ap-list

displays or clears the APs that will be provisioned.

show|clear provisioning-params

displays or resets values in the provisioning-params workspace.

show ap provisioning

shows the provisioning parameters an AP is currently using.

Example

The following commands change the IP address of the master controller on the AP:

(host) (config) #provision-ap

read-bootinfo ap-name lab103

show provisioning-ap-list

copy-provisioning-params ap-name lab103

master 10.100.102.210

reprovision ap-name lab103

Dell PowerConnect W-Series ArubaOS 6.2 |

Reference Guide

provision-ap | 491

Summary of Contents for PowerConnect W-7200 Series



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerConnect W-7200 Series

Reviews:

Related manuals for PowerConnect W-7200 Series

Brands by name

Popular brands

Dell PowerConnect W-7200 Series, Reference Manual

Search results

Summary of Contents for PowerConnect W-7200 Series

Reviews:

Related manuals for PowerConnect W-7200 Series

Brands by name

Popular brands