Dell PowerConnect W-7200 Series, Reference Manual

Page: 545 / 1538

router ospf
router ospf
area <area-id>
default-cost <cost>
nssa [default-information no-redistribution | no-summary]
stub [no-summary]
default-information originate always
redistribute vlan [<vlan-ids> | add <vlan-ids> | remove <vlan-ids>]
router-id <rtr-id>
subnet exclude <addr> <mask>
Description
Global OSPF configuration for the upstream router.
Syntax
Parameter Description
area <area-id>
Enter the keyword area followed by the area identification, in dotted
decimal format, to configure an OSPF area.
default-cost <cost> Set the summary cost of a NSSA/stub area (in route metric)
Range: 0 to 16777215
nssa
Set an area as a NSSA
default-information-originate
Originate Type 7 default into the NSSA area
no-redistribution
Set the NSSA area for no distribution into this NSSA area
no-summary Do not send summary LSA into this NSSA area
stub [no-summary]
Set an area as a Total Stub Area and optionally do not send summary
LSA into this area
default-information originate
always
Control distribution of default information by distributing a default
route.
redistribute vlan <vlan-ids>
Redistribute the vlan user subnet.
add <vlan-ids>
Add the user VLANs to the list
remove <vlan-ids>
Remove user VLANs to the list.
router-id <rtr-id> Enter the router ID in IP address format.
subnet exclude <addr> <mask>
Specify the subnet that OSPF will not advertise. Enter the subnet and
mask address in dotted decimal format (A.B.C.D).
Usage Guidelines
OSPFv2 is a dynamic Interior Gateway routing Protocol (IGP) based on IETF RFC 2328. The ArubaOS
implementation of OSPF allows controllers to deploy effectively in a Layer 3 topology. For more detailed
information, refer to the OSPF Chapter in the
Dell PowerConnect W-Series ArubaOS User Guide .
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide router ospf | 545