Dell PowerConnect W-7200 Series, Reference Manual

Page: 878 / 1538

878 | show ap spectrum device-list Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Usage Guidelines
Issue this command to view detailed information about currently active non-Wi-Fi devices on the network. Use the
optional
type parameter to display data for one specific device type only. For additional details about non-Wi-Fi
device types shown in this table, see "Non-Wi-Fi Interferers" on page 874 .
NOTE: A hybrid AP on a 20 MHz channel will see 40 MHz Wi-Fi data as non-Wi-Fi data.
Examples
The output of this example shows that the spectrum monitor ap123 is able to see data for a single non-Wi-Fi device
on its 802.11a radio. Note that the output below is divided into two sections to better fit on the page of this
document. In the ArubaOS CLI, this information is displayed in a single long table.
(host) #show ap spectrum device-list ap-name ap123 freq-band 5ghz
Non-Wifi Device List Table
--------------------------
Type ID Cfreq Bandwidth Channels-affected Signal-strength
---- -- ----- --------- ----------------- ---------------
Cordless Phone FH 3 5826093 80000 149 157 161 165 49
Duty-cycle Add-time Update-time
---------- -------- -----------
5 2010-05-17 10:04:53 2010-05-17 10:04:55
Total:1
Current Time:2010-05-17 10:04:56
The output of this command includes the following information:
Column Description
Type
Device type. This parameter can be any of the following:
l
audio FF (fixed frequency)
l
bluetooth
l
cordless base FH (frequency hopper)
l
cordless phone FF (fixed frequency
l
cordless network FH (frequency hopper)
l
generic FF (fixed frequency
l
generic FH (frequency hopper)
l
generic interferer
l
microwave
l
microwave inverter
l
video
l
xbox
NOTE: For additional details about non-Wi-Fi device types shown in this table, see "Non-
Wi-Fi Interferers" on page 874
ID ID number assigned to the device by the spectrum monitor or hybrid AP radio. Spectrum
monitors and hybrid APs assign a unique spectrum ID per device type.
Cfreq
Center frequency of the signal sent from the device.
Bandwidth
Channel bandwidth used by the device.
Channels-affected Radio channels affected by the wireless device.