Dell PowerConnect W-7200 Series, Reference Manual

Page: 739 / 1538

Parameter Description
Rejects parameter shows the number of times the AP has rejected a scan because of the
power-save aware scan feature.
Voice aware Scan
Rejects
If you enable the VoIP Aware Scan feature in the AP’s ARM profile, the AP will not
attempt to scan a different channel if one of its clients has an active VoIP call. This Voice
aware scan Rejects parameter shows the number of times the AP has rejected a scan
because of the Voip aware scan feature.
Scan Success
Number of successful scans. To view scan details, use the command show ap arm
scan-times .
EIRP The value of this parameter is the transmission power level (in dBm) + the antenna gain
value.
MAX EIRP
The max EIRP depends on AP capability and the regulatory domain constraint for the
channel of operation. For example, in the US, Channels 36-48 have max EIRP of 23dBm
UAPSD Flush STA Wake Number of times a client wakes from power-save mode and flushes the UAPSD queue.
UAPSD SP Set
The number of unique UAPSD Scheduled Period is started in response to UAPSD trigger
frames.
UASPD Dup Trig
The number of times duplicate UAPSD trigger frames are received (i.e., retried UAPSD
triggers that were received by the AP more than once).
UAPSD Recv frame for TX
The number of frames received for transmission over the air interface using UAPSD
UAPSD Ageout Drain
The number of time UAPSD queue is drained (i.e. frames are dropped) due to ageout.
UAPSD TX proc comp
The number of UAPSD frames that were successfully transmitted
UAPSD SP In prog The number of times a trigger frame was received while a Scheduled Period (SP) was
already in progress based on an earlier trigger frame.
UAPSD QOS NULL TX
The number of times the AP had to respond with a QoS Null Data frame in response to a
UAPSD trigger because AP did not have Data frame queued for that client
UAPSD TX HW Queued The number of frames (Data and Null Data) that were transferred to the radio HW for
transmission, in response to UAPSD triggers.
UAPSD SP Reset
The number of times the UAPSD Scheduled Period (SP) in progress is reset or cancelled.
Frames Rcvd For TX
Number of frames received for transmission.
Tx Frames Dropped Number of transmission frames that were dropped.
Frames Transmitted
Number of frames successfully transmitted.
PS Unicast
Number of power save unicast frames
DTIM Broadcast
Number of broadcast frames with DTIM values.
Success With Retry Number of frames that were transmitted after being retried.
Tx Mgmt Frames
Number of management frames transmitted.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show ap debug radio-stats | 739