Dell PowerConnect W-7200 Series, Reference Manual

Page: 814 / 1538

814 | show ap monitor debug Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
WMS on Master disabled
Stats Update Interval 60
Poll Interval 174000
Num Switches 1
Collect Stats enabled
WLAN Interface Switch Status
-----------------------------
Bssid Type Status Last-reg N-reg Last-update Next-update N-updates Last-
ack
----- ---- ------ -------- ----- ----------- ----------- --------- -----
---
00:1a:1e:11:5f:10 local up 3321891 3821 3322965 197 10368
3322965
00:1a:1e:11:5f:00 local up 3321891 3821 3322917 187 10378
3322965
RTLS configuration
-------------------
Type Server IP Port Frequency Active
---- --------- ---- --------- ------
MMS 102.0.2.19 8000 N/A
Aeroscout 192.0.2.199 1144 N/A
RTLS 192.0.2.19 5050 30 *
The output of this command includes the following information:
Column Description
bssid The Basic Service Set Identifier (BSSID) for the AP. This is usually the AP’s MAC address.
scan Indicates whether or not if active scanning is enabled on this AP.
monitor Indicates whether the AP radio is currently enabled or disabled.
probe-type This parameter displays one of the following options to show the AP is configured.
l
sap: Default AP setting.
l
am: AP is configured as an Air Monitor.
l
m-portal: AP is configured as a Mesh portal.
l
m-point: AP is configured as a Mesh point.
task This parameter displays one of the following options to show the radio’s current task:
l
scan: AP is scanning other channels.
l
tuned: AP is tuned on one channel.
l
locate: AP has been asked to locate a specific AP or client.
l
pcap: The AP is enabled with the Packet Capture feature.
channel The radio channel currently used by an AP’s WLAN interface.
pkts Number of packets seen on the interface.
mac MAC address for the AP’s wired interface.
ip The AP’s IP address.
gw-ip IP address for the AP’s gateway.
gw-mac MAC address for the AP’s gateway.