Dell PowerConnect W-7200 Series, Reference Manual

Page: 832 / 1538

832 | show ap radio-database Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Parameter Description
descending Sort the output in descending order.
start
Start displaying the output of this command at a chosen index number by entering the
index number of the AP at which command output should start.
switch <switch-ip-
addr>
Display information for APs associated with a specific controller by entering the IP
address of that controller.
Example
The output of the command shows that the AP is aware of five other access points, three of which are active.
(host) #show ap radio-database
AP Radio Database
-----------------
Name Group AP Type IP Address Status Flags Switch IP 11g
Mode/Chan/EIRP/Cli 11a Mode/Chan/EIRP/Cli
---- ----- ------- ---------- ------ ----- --------- ---------
------------- ----------------------
mp3 default 125 10.3.129.96 Up 14h:45m:0s M 10.3.129.232 AP(HT)
/10/0/0 AP(HT)/100/4/0
sw-ad-ap124-11 default 124 10.3.129.99 Up 14h:43m:18s M 10.3.129.232 AP(HT)
/10/0/0 AP(HT)/100+/2/0
sw-ad-ap125-13 default 125 10.3.129.98 Up 14h:49m:36s M 10.3.129.232 AP(HT)
/10/2.5/0 AP(HT)/100/4/0
sw-ad-ap65-19 default 65 10.3.129.95 Down 10.3.129.232
Flags: U = Unprovisioned; N = Duplicate name; G = No such group; L = Unlicensed
R = Remote AP; I = Inactive; X = Maintenance Mode; P = PPPoE AP; B = Built-in AP
S = RFprotect Sensor; d = Disconnected Sensor; H = Using 802.11n license
M = Mesh node; Y = Mesh Recovery
The output of this command includes the following information:
Column Description
Name
Name of the AP.
Group
AP group to which the AP is associated.
AP Type AP model type.
IP address
IP address of the AP.
Status
Current AP status. If the AP is currently up, this data column also shows the
amount of time for which the AP has been active.
Flags This column displays a letter that corresponds to some type of additional
information for the AP. The key to the list of possible flags appears at the bottom of
the output of this command.
Switch IP
IP address of the AP’s controller.
11g Mode/Chan/EIRP/Cli 802.1g radio type and mode/802.11g radio channel used by the AP/current Effective