Dell PowerConnect W-7200 Series, Reference Manual

Page: 1296 / 1538

1296 | show user Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show user
show user
ap-group <ap-group>
ap-name <ap-name>
authentication-method dot1x|mac|opensystem|psk|stateful-dot1x|via-vpn|vpn|web[rows
<NUMBER> <NUMBER>]
bssid <A:B:C:D:E:F> rows <NUMBER> <NUMBER>
devtype <device>
essid <STRING> rows <NUMBER> <NUMBER>
internal rows <NUMBER> <NUMBER>
ip <A.B.C.D> rows <NUMBER> <NUMBER>
location b.f.l rows <NUMBER> <NUMBER>
mac <A:B:C:D:E:F>
mobile {[bindings][visitors]} [rows <NUMBER> <NUMBER>]
name <STRING>
phy-type {[a]|[b]}[rows <NUMBER> <NUMBER>]
role <STRING> rows <NUMBER> <NUMBER>
rows <NUMBER> <NUMBER>
Description
Displays detailed information about the controller’s connection to a user device, in regards to mobility state and
statistics, authentication statistics, VLAN assignment method, AP datapath tunnel info, radius accounting
statistics, user name, user-role derivation method, datapath session flow entries, and 802.11 association state and
statistics. The
show user command allows you to filter specific information by parameter.
Syntax
Parameter Description
ap-group <ap-group>
Filter the output of this command by showing users connected to APs that belong
to the specified AP group.
ap-name <ap-name>
Filter the output of this command by the name of the AP to which the user is con-
ected.
authentication-method
Filter the output of this command by the authentication method used for the
device:
dot1x
Show data for devices using 802.1X authentication.
mac
Show data for devices using MAC authentication.
opensystem
Show data for devices using open (no) authentication.
psk Show data for devices that do not use authentication but use a pre-shared key for
encryption.
stateful-dot1x
Show data for devices using stateful 802.1X authentication.
via-vpn
Show data for devices that authenticate using Dell VIA.
vpn Show data for devices using VPN authentication.