Dell PowerConnect W-7200 Series, Reference Manual

Page: 82 / 1538

82 | aaa server-group Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
aaa server-group
aaa server-group <group>
allow-fail-through
auth-server <name> [match-authstring contains|equals|starts-with <string>] [match- fqdn
<string>] [position <number>] [trim-fqdn]
clone <group>
no ...
set role|vlan condition <attribute> contains|ends-with|equals|not-equals|starts-with
<string> set-value <set-value-str> [position <number>]
Description
This command allows you to add a configured authentication server to an ordered list in a server group, and
configure server rules to derive a user role, VLAN ID or VLAN name from attributes returned by the server during
authentication.
Syntax
Parameter Description Default
<group> Name that identifies the server group. The name must be 32
characters or less. —
allow-fail-through
When this option is configured, an authentication failure with the
first server in the group causes the controller to attempt
authentication with the next server in the list. The controller
attempts authentication with each server in the ordered list until
either there is a successful authentication or the list of servers in the
group is exhausted. disabled
auth-server <name> Name of a configured authentication server. —
match-authstring
This option associates the authentication server with a match rule
that the controller can compare with the user/client information in
the authentication request. With this option, the user/client
information in the authentication request can be in any of the
following formats:
<domain>\<user>
<user>@<domain>
host/<pc-name>.<domain>
An authentication request is sent to the server only if there is a
match between the specified match rule and the user/client
information.You can configure multiple match rules for an
authentication server. —
contains
contains: The rule matches if the user/client information contains
the specified string.
—
equals
The rule matches if the user/client information exactly matches the
specified string.
—
starts-with
The rule matches if the user/client information starts with the
specified string.
—
match-fqdn <string>
This option associates the authentication server with a specified —