Dell PowerConnect W-7200 Series, Reference Manual

Page: 112 / 1538

112 | ap authorization-profile Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
ap authorization-profile
ap authorization-profile <profile>
authorization-group <profile>
Description
This command defines a temporary configuration profile for remote APs that are not yet authorized on the network.
Syntax
Parameter Description Range Default
authorization-profile
<profile>
Name of this instance of the profile. The name
must be 1-63 characters. — “default”
authorization-group
<profile> Name of a configuration profile to be assigned to
the group unauthorized remote APs. — “NoAu-
thApGroup”
Usage Guidelines
The AP authorization-profile specifies which configuration should be assigned to a remote AP that has been
provisioned but not yet authenticated at the remote site. By default, these yet-unauthorized APs are put into the
temporary AP group
authorization-group and assigned the predefined profile NoAuthApGroup . This configuration
allows a user to connect to an unauthorized remote AP via a wired port then enter a corporate username and
password. Once a valid user has authorized the remote AP, the AP will be permanently marked as authorized on the
network and will will then download the configuration assigned to that AP by it's permanent AP group.
Example
The following command creates a new authorization profile with a non-default configuration for unauthorized
remote APs:
ap authorization-profile default2
authorization-group NoAuthApGroup2
Command History
Release Modification
ArubaOS 5.0 Command introduced
Command Information
Platforms Licensing Command Mode
Available on all platforms Base operating system Config mode on master or local controllers