Dell PowerConnect W-7200 Series, Reference Manual

Page: 144 / 1538

144 | ap packet-capture Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
(type eq beacon) or ((sta eq 000000010203) and (dir eq tods))
(type == data) && ((sta = 000000010203) || (sta == 000000010203))
(type != beacon)
(wep nq 1)
(type eq all)
Examples
The following command starts a raw packet capture session for the AP ly115 on radio 0 , and sends the packets to
the client at 10.64.102.4 on port 5000 .
(host) (config) #ap packet-capture raw-start ap-name ly115 10.64.102.4 5000 0 radio 0
Packet capture has started for pcap-id:1
The following commands start an interactive packet capture session for the AP ap1 .
#ap packet-capture open-port 5555
#ap packet-capture interactive ap-name ap1 "type eq all" 192.168.0.3 5555 radio 0
The output of the command in the example below displays packet capture session statistics for the AP ap1 . In this
example, the output has been divided into multiple sections to better fit on the pages of this document. In the
actual command-line interface, it will appear in a single, long table.
#show ap packet-capture status ap-name ap1
Packet Capture Sessions at ap1, IP 10.3.44.167
----------------------------------------------
pcap-id filter type intf channel max-pkts
------- ------ ---- ---- ------- --------
1 type eq all interactive 6c:f3:7f:ba:65:70 153 0
max-pkt-size num-pkts status url target Radio ID
------------ -------- ------ ------ ------
65536 3759 in-progress 192.168.0.3/5555 0
Related Commands
To view the status of outstanding packet capture (pcap) sessions, use show ap packet-capture status .
Command History
Version Change
ArubaOS3.0 Command Introduced
ArubaOS3.4 The maxlen parameter was introduced, and the pcap start command deprecated.
ArubaOS6.2 Name changed from pcap to ap packet capture.