Dell PowerConnect W-7200 Series Reference Manual Download Page 159

Page: 159 / 1538

Parameter

Description

Range

Default

rf-band

For APs that support both a and b/g RF bands, RF band
in which the AP should operate:

g = 2.4 GHz

a = 5 GHz

a/g

rtls-server

Enables the AP to send RFID tag information to an RTLS
server.

—

ip-addr

IP address of the server to which location reports are
sent.

—

port

Port number on the server to which location reports are
sent.

—

key

Shared secret key.

—

station-message-
frequency

Indicates how often packets are sent to the server.

5-3600

30 seconds

session-acl

Session ACL configured with the ip access-list session
command.
NOTE: This parameter requires the PEFNG license.

—

syscontact

SNMP system contact information.

—

telnet

Enable or disable telnet to the AP.

—

disabled

Usage Guidelines

The AP system profile configures AP administrative operations, such as logging levels.

Example

The following command sets the LMS IP address in an AP system profile:

(host) (config) #ap system-profile local1

lms-ip 10.1.1.240

Command History

Release

Modification

ArubaOS 3.0

Command introduced

ArubaOS 3.2

Support for additional RTLS servers and remote AP enhancements was introduced.

ArubaOS 3.3.2

Maintenance-mode parameter was introduced.

Multiple remote AP DHCP server enhancements were introduced.

Support for RFprotect server and backup server configuration was introduced.

The mms-rtls-server parameter was deprecated in ArubaOS 3.3.2.

ArubaOS 5.0

The master-ip, rfprotect-server-ip and rfprotect-bkup-server parameters were deprecated.

ArubaOS 6.0

Added support for the option to set the RF scanning band (am-scan-rf-band).
The keepalive-interval parameter was deprecated.

Dell PowerConnect W-Series ArubaOS 6.2 |

Reference Guide

ap system-profile | 159

Summary of Contents for PowerConnect W-7200 Series



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerConnect W-7200 Series

Reviews:

Related manuals for PowerConnect W-7200 Series

Brands by name

Popular brands

Dell PowerConnect W-7200 Series, Reference Manual

Search results

Summary of Contents for PowerConnect W-7200 Series

Reviews:

Related manuals for PowerConnect W-7200 Series

Brands by name

Popular brands