Dell PowerConnect W-7200 Series, Reference Manual

Page: 253 / 1538

esi parser rule
esi parser rule <rule_name>
[condition <expression>] |
[domain <name>] |
[enable]
[match {ipaddr <expression> | mac <expression> | user <expression> }] |
[no] |
[position <position>] |
[set {blacklist | role <role>} |
[test {msg <msg> | file <filename>}]
Description
This command creates or changes an ESI syslog parser rule.
Syntax
Parameter Description Range Default
condition
Specifies the REGEX (regular expression) pattern that uniquely
identifies the syslog. — —
domain (Optional.) Specify the ESI syslog parser domain to which this rule
applies. If not specified, the rule matches with all configured ESI
servers. — —
enables
Enables this rule.
Note: The condition, user match, and set action parameters must be
configured before the rule can be enabled. — Not enabled
match
Specifies the user identifier to match, where
ipaddr
,
mac
, and
user
take a REGEX pattern that uniquely identifies the user.
— —
no
Negates any configured parameter. — —
position
Specifies the rule’s priority position. 1–32; 1
highest —
set Specifies the action to take: blacklist the user or change the user
role.
Note: The role entity should be configured before it is accepted by
the ESI rule. — —
test Test the regular expression output configured in the
esi parser rules
command. You can test the expressions
against a specified syslog message, or test the expression against a
sequence of syslog messages contained in a file.
— —
Usage Guidelines
The user creates an ESI rule by using characters and special operators to specify a pattern that uniquely identifies a
syslog message. This “condition” defines the type of message and the ESI domain to which this message pertains.
The rule contains three major fields:
l
Condition: The pattern that uniquely identifies the syslog message type.
l
User: The username identifier. It can be in the form of a name, MAC address, or IP address.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide esi parser rule | 253