Dell PowerConnect W-7200 Series Reference Manual Download Page 718

Page: 718 / 1538

718 | show ap debug bss-stats

Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide

Parameter

Description

Frames Rcvd For TX

Number of frames received for transmission.

Tx Frames Dropped

Number of transmission frames that were dropped.

Frames Transmitted

Number of frames successfully transmitted.

Success With Retry

Number of frames that were transmitted after being retried.

Tx Mgmt Frames

Number of management frames transmitted.

Beacons Transmitted

Number of beacons transmitted.

Tx Probe Responses

Number of transmitted probe responses.

Tx Data Frames

Number of transmitted data frames.

Multicast Data

Number of multicast and broadcast frames transmitted.

Tx CTS Frames

Number of clear-to-sent (CTS) frames transmitted.

Dropped After Retry

Number of frames dropped after an attempted retry.

Dropped No Buffer

Number of frames dropped because the AP’s buffer was full.

Missed ACKs

Number of missed acknowledgements (ACKs).

Long Preamble

Number of frames sent with a long preamble.

Short Preamble

Number of frames sent with a short preamble.

Tx EAPOL Frames

Number of Extensible Authentication Protocol over LAN (EAPOL) frames transmitted.

Tx 6 Mbps

Number of frames transmitted at 6 Mbps.

Tx 9 Mbps

Number of frames transmitted at 9 Mbps.

Tx 12 Mbps

Number of frames transmitted at 12 Mbps.

Tx 18 Mbps

Number of frames transmitted at 18 Mbps.

Tx 24 Mbps

Number of frames transmitted at 24 Mbps.

Tx 36 Mbps

Number of frames transmitted at 36 Mbps.

Tx 48 Mbps

Number of frames transmitted at 48 Mbps.

Tx 54 Mbps

Number of frames transmitted at 54 Mbps.

Tx HT 108 Mbps

Number of frames transmitted at 108 Mbps.

Tx HT 120 Mbps

Number of frames transmitted at 120 Mbps.

Tx HT 162 Mbps

Number of frames transmitted at 162 Mbps.

Tx HT 180 Mbps

Number of frames transmitted at 180 Mbps.

Summary of Contents for PowerConnect W-7200 Series



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerConnect W-7200 Series

Reviews:

Related manuals for PowerConnect W-7200 Series

Brands by name

Popular brands

Dell PowerConnect W-7200 Series, Reference Manual

Search results

Summary of Contents for PowerConnect W-7200 Series

Reviews:

Related manuals for PowerConnect W-7200 Series

Brands by name

Popular brands