Dell PowerConnect W-7200 Series, Reference Manual

Page: 1393 / 1538

show wms probe
show wms probe
Description
Display detailed information for a list of WMS probes.
Syntax
No parameters.
Example
This example shows the Probe List table for WMS probes. The output below has been split into two tables to better
fit in this document. In the actual command-line interface, this information appears in a single, long table.
(host) #show wms monitor-summary
WMS Monitor Summary
-------------------
Last 5 Min Last Hour All
- ---------- --------- ---
Valid APs 1 1 1
Interfering APs 57 57 60
Rogue APs 3 3 3
Manually Contained APs 0 0 0
Unclassified APs 0 0 0
Neighbor APs 0 0 0
Suspected Rogue APs 138 138 139
Valid Clients 0 0 0
Interfering Clients 1 1 1
Manually Contained Clients 0 0 0
Column Description
Monitor Eth MAC Ethernet MAC address of a probe.
BSSID Probe Radio BSSID.
PHY Type Radio PHY type:
l
802.11A
l
802.11AHT-40Mbps
l
802.11AHT-20Mbps
l
802.11G
l
802,11GHT-20Mbps
IP IP address of the AP.
LMS IP IP address of the AP’s local controller.
Scan Shows if the Air Monitor is performing scanning.
Status If the scan column displays a status of Up, the AP or AM is active
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show wms probe | 1393