Dell PowerConnect W-7200 Series, Reference Manual

Page: 689 / 1538

show ap client status
show ap client status <client-mac>
Description
Show the current status of a specific client.
Syntax
Parameter Description
<client-mac>
MAC address of a client
Examples
The output of the command shows the status of an individual client in the STA (station) table.
(host) #show ap client status 00:13:fd:42:32:38
STA Table
---------
bssid auth assoc aid l-int essid vlan-id tunnel-id
----- ---- ----- --- ----- ----- ------- ---------
00:1a:1e:a3:02:c9 y y 7 10 corp-wpa2 65 0x10c0
State Hash Table
----------------
bssid state reason
----- ----- ------
00:1a:1e:a3:02:c9 auth-assoc 0
The output of this command includes the following information:
Column Description
bssid
Basic Service Set ID (BSSID) of the client.
auth
This column displays a y if the AP has been configured for 802.11 authorization frame types.
Otherwise, it displays an n.
assoc
This column displays a y if the AP has been configured for 802.11 association frame types.
Otherwise, it displays an n.
aid
Number of beacons in the 802.11 listen interval. There are ten beacons sent per second, so
a ten-beacon listen interval indicates a listen interval time of 1 second.
l-int
Number of beacons in the 802.11 listen interval. There are ten beacons sent per second, so
a ten-beacon listen interval indicates a listen interval time of 1 second.
essid
Extended Service Set ID (ESSID) of the client.
vlan-id VLAN ID of the VLAN used by the client
tunnel-id
Identification number for the tunnel
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show ap client status | 689