Dell PowerConnect W-7200 Series, Reference Manual

Page: 1114 / 1538

1114 | show lacp Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show lacp
show lacp <group_number> {counters | internal | neighbor}
Description
View the LACP configuration status.
Syntax
Parameter Description
<group_number>
Enter the Link aggregation group number.
Range: 0-7
counters
Enter the keyword counters to view the LACP traffic.
internal Enter the keyword internal to view the LACP internal information.
neighbor
Enter the keyword neighbor to view the LACP neighbor information.
Example
The port uses the group 1 as its “actor admin key”. By default, all the ports use the long timeout value (90
seconds).
(Host)#show lacp 0 neighbor
Flags: S - Device is requesting Slow LACPDUs
F - Device is requesting fast LACPDUs
A - Device is in active mode P - Device is in passive mode
Partner's information
---------------------
Port Flags Pri OperKey State Num Dev Id
---- ----- ---- ------- ----- ---- ----------------
FE 1/1 SA 1 0x10 0x45 0x5 00:0b:86:51:1e:70
FE 1/2 SA 1 0x10 0x45 0x6 00:0b:86:51:1e:70
When a port, in a LAG, is misconnected (that is, the partner device is different than the other ports or the
neighborship times out or can not exchange LACPDUs with the partner), the port status is displayed as “DOWN”
(see the following example).
(Host)#show lacp 0 internal
Flags: S - Device is requesting Slow LACPDUs
F - Device is requesting fast LACPDUs
A - Device is in active mode P - Device is in passive mode
Port Flags Pri AdminKey OperKey State Num Status
---- ----- ---- -------- -------- ----- ---- -------
FE 1/1 SA 1 0x1 0x1 0x45 0x2 DOWN
FE 1/2 SA 1 0x1 0x1 0x45 0x3 UP
The “counters” option allows you to view LACP received (Rx) traffic, transmitting (Tx) traffic, data units (DU)
received and transmitted by port.