Dell H815dw, User Manual

Page: 207 / 537

Understanding the Printer Menus
207
Auto Redial Setup
Purpose:
To configure settings for automatic redial.
Values:
Tone / Pulse
Purpose:
To select the dialing type.
Values:
Prefix Dial
Purpose:
To select whether to set a prefix dial number.
Values:
Fax Cover Page
Purpose:
To set whether to attach a cover page to faxes.
Values:
NOTE:
This setting affects the setting of the direct fax driver, and the default setting of the fax function when the Fax tile is
added on the Home screen.
Redial Attempts 3
*
Sets the number of redial attempts to make when the
destination fax number is busy. If you enter 0, the printer
will not redial. The value is set in increments of 1.
Available Range: 0-13
Interval of Redial 1 minute
*
Sets the interval between redial attempts. The value is set
in increments of 1 minute.
Available Range: 1-15 minutes
Resend Delay 8 seconds
*
Sets the interval between re-send attempts. The value is set
in increments of 1 second.
Available Range: 3-255 seconds
Tone
*
Uses tone dialing.
Pulse(10PPS) Sets "DP (10PPS)" (Dial Pulse, 10 Pulse Per Second) as the dial type.
Pulse(20PPS) Sets "DP (20PPS)" (Dial Pulse, 20 Pulse Per Second) as the dial type.
Off
*
Does not set a prefix dial number.
On Sets a prefix dial number.
Prefix Dial Number Sets a prefix dial number of up to five digits. This number dials before any
auto dial number is started. It is useful for accessing the Private Automatic
Branch Exchange (PABX).
Off
*
Does not attach a cover page to faxes.
On Attaches a cover page to faxes.