Dell H815dw, User Manual

Page: 221 / 537

Understanding the Printer Menus
221
Adjust Fusing Unit
NOTE:
The print quality changes depending on the setting values you select for this item.
Purpose:
To adjust the temperature setting of the fusing unit for each paper type.
Values:
Adjust Density
Purpose:
To adjust density level.
Values:
Chart
Purpose:
To print various charts that can be used for diagnosis of the printer.
Values:
Plain
(60-80g/m
2
)
0
*
Sets the fusing unit temperature in increments of 1. The default
settings may not give the best output on all paper types. When the
printed paper has curled, try to lower the temperature. When the toner
does not fuse on the paper properly, try to increase the temperature.
Available Range: -3 to +3
Plain Thick
(81-105g/m
2
)
0
*
Available Range: -3 to +3
Covers
(106-163g/m
2
)
0
*
Available Range: -3 to +3
Covers Thick
(164-216g/m
2
)
0
*
Available Range: -3 to +3
Rough Surface 0
*
Available Range: -3 to +3
Label 0
*
Available Range: -3 to +3
Envelope 0
*
Available Range: -3 to +3
Japanese Postcard 0
*
Available Range: -3 to +3
Darken -3 to -1 Adjusts the density level darker than the normal setting.
Normal
*
0
Works well with standard typed or printed documents.
Lighten +1 to +3 Adjusts the density level lighter than the normal setting.
Pitch Chart Print Prints a full halftone page. Also prints a page to check the pitch. A total
of two pages are printed.
Full Page Solid 1-Sided Specifies to print a chart of the full page solid on the paper.
2-Sided Specifies to print a chart of the full page solid on both sides of the
paper.
Print Begins to print a full page solid.