Dell H815dw, User Manual

Page: 137 / 537

Dell™ Printer Configuration Web Tool
137
Printer Settings
The Printer Settings tab includes System Settings , Network Settings , USB Settings , PCL Settings , PS Settings ,
PDF Settings , Secure Settings , Copy Defaults , Copy Settings , Fax Defaults , Fax Settings, Scan Defaults , Direct
Print Defaults/USB Direct Print Defaults
*1
, and MIFARE Customized Card pages.
*1
Direct Print on the Dell Cloud Multifunction Printer | H815dw; USB Direct Print on the Dell Smart Multifunction Printer | S2815dn
System Settings
Purpose:
To configure the basic printer settings.
Values:
Speed Dial Click Start to print the Speed Dial report.
Address Book Click Start to print the Address Book list.
Server Address Click Start to print the Server Address list.
Fax Activity Click Start to print the Fax Activity report.
Fax Pending Click Start to print the Fax Pending list.
Stored Documents
*1
Click Start to print the Stored Documents list.
*1
This item is available only when RAM Disk is enabled.
Power Saver Time - Sleep Sets the time taken by the printer to enter Sleep mode after it finishes a job.
Power Saver Time - Deep Sleep Sets the time taken by the printer to enter Deep Sleep mode after it has
entered Sleep mode.
mm / inch Sets the measurement unit to be used on the touch panel as either mm or
inches.
Screen Brightness Sets the brightness level of the touch panel screen.
Control Panel Tone Sets the volume of the tone that is emitted when the operator panel input is
correct, or disables the tone.
Invalid Key Tone Sets the volume of the tone that is emitted when the operator panel input is
incorrect, or disables the tone.
Machine Ready Tone Sets the volume of the tone that is emitted when the printer becomes ready,
or disables the tone.
Copy Completed Tone Sets the volume of the tone that is emitted when a copy job is complete, or
disables the tone.
Job Completed Tone Sets the volume of the tone that is emitted when a job other than a copy job
is complete, or disables the tone.
Fault Tone Sets the volume of the tone that is emitted when a job ends abnormally, or
disables the tone.
Alert Tone Sets the volume of the tone that is emitted when a problem occurs, or
disables the tone.
Out of Paper Tone Sets the volume of the tone that is emitted when the printer runs out of
paper, or disables the tone.
Low Toner Alert Tone Sets the volume of the tone that is emitted when the toner is low, or
disables the tone.
Auto Clear Alert Tone Sets the volume of the tone that is emitted 5 seconds before the printer
performs auto clear, or disables the tone.