Dell H815dw, User Manual

Page: 340 / 537

340
Scanning
g
In the POP3 Server Address text box, enter the POP3 server address in IP address format of "aaa.bbb.ccc.ddd"
or as a DNS host name using up to 63 characters.
*1
h
In the POP3 Port Number text box, enter the POP3 server port number. This must be between 1 and 65535.
*1
i
In the POP User Name text box, set the POP3 account user name. Up to 63 alphanumeric characters, periods,
hyphens, underscores, and at symbols (@) can be used. If specifying more than one address, separate them
using commas.
*1
j
In the POP User Password text box, enter the POP3 account password using up to 31 alphanumeric
characters.
*1
k
In the Re-enter POP User Password text box, enter the POP user password again to confirm it.
*1
l
In the Reply Address text box, enter the reply e-mail address sent with each E-Mail Alert .
*1
Required to enter if you select POP before SMTP (Plain) or POP before SMTP (APOP) for E-Mail
Send Authentication .
4 Click Apply New Settings .
If SMTP authentication is selected for E-Mail Send Authentication and if SSL/TLS encryption is used to
communicate with the SMTP sever, the SSL/TLS type must be set in SMTP-SSL/TLS Communication of
SSL/TLS under the Security tab. Proceed to step 5.
If SSL/TLS is not used or if " Invalid" , " POP before SMTP (Plain)" , or " POP before SMTP (APOP)" is selected for
E-Mail Send Authentication , the mail server settings are complete.
NOTE:
To send an e-mail through Gmail, set the SSL/TLS type should be set to STARTTLS in SMTP-SSL/TLS
Communication of SSL/TLS under the Security tab.
5 Click Security tab.
6 Select SSL/TLS .
7
Select a SSL/TLS type from the SMTP-SSL/TLS Communication list.
NOTE:
To use a Gmail account, select STARTTLS.
8 Click Apply New Settings .
Setting the Administrator's E-mail Address
To make the printer to set an administrator's e-mail address, follow the steps below:
1
Launch the Dell Printer Configuration Web Tool .
a
Open the web browser.
b
Enter the IP address of your printer in the web browser.
See "Dell™ Printer Configuration Web Tool."
2
Click Print Server Settings .
3 Click Basic Information .
4 Set administrator's e-mail address in the Administrator E-Mail Address text box. Up to 63 alphanumeric
characters, periods, hyphens, underscores, and at symbols (@) can be used.
5
Click Apply New Settings .