10.
NOTE:
If your computer provides a wireless LAN adapter tool, change the wireless settings using this
tool. Or you can change the wireless settings using the tool provided by the operating system. See the
instructions below.
Select
Network Connections
from Control Panel.
a.
Right-click
Wireless Network Connection
and select
Properties
.
b.
Select the
Wireless Network
tab.
c.
Click
Advanced
.
d.
Do either of the following:
e.
When wireless ad-hoc mode is set to the printer:
Select
Computer to Computer (ad hoc) networks only
and close the
Advanced
dialog box.
When wireless infrastructure mode is set to the printer:
Select
Access point (Infrastructure) networks only
and close the
Advanced
dialog box.
Select the setting that you send to the printer in the list in
Preferred Network
group.
f.
Click
Move up
to move the setting to the top of the list.
g.
Click
OK
to close the
Property
dialog box.
h.
On the
Setting-Ready Printer
screen, verify that the correct IP address is assigned to the printer to
which the wireless setting is set, and then click
Install
.
11.
If you select the
I am setting up this printer on server
check box on the
Select Printer
screen and
also select the
PostScript Driver
check box on the
Enter Printer Settings
screen, the
Adobe
Systems Inc. License Agreement
screen appears. Select the
I accept the terms of the license
agreement
option button, and then click
Install
.
12.
On the
Congratulations!
screen, click
Finish
to complete the installation. A test page will be printed
with the installed printer by clicking the
Print Test Page
button.
13.
Scene 2. Construct new wireless network environment for both computer
and printer (When wireless setting needs to be set to your computer)
Insert the
Drivers and Utilities
CD into your computer to launch the installation software.
1.
NOTE:
If the CD does not automatically launch, click
Start
Run
, and then type D:\setup.exe
(where D is the drive letter of your CD), and then click
OK
.
NOTE:
For Windows Vista, click
Continue
when the
User Account Control
dialog box appears.
2. Select the
Network Installation
option button, and then click
Next
.
3.
Summary of Contents for 3110 Color Laser
