Id
Displays the job id.
Job Name
Displays the file name of the completed print job.
Owner
Displays the job owner's name.
Host Name
Displays the name of the host computer.
Output Result
Displays the status of completed print jobs.
Impression Number
Displays the number of pages in the print job.
No. of Sheets
Displays the number of sheets in the print job.
Host I/F
Displays the status of the host interface.
Job Submitted Time
Displays the date the print job was submitted.
Printer Settings
Use the
Printer Settings
menu to display the printer settings report and to configure printer settings.
The following tabbed pages are displayed at the top of the Right Frame.
Printer Settings Report
The
Printer Settings Report
tab includes the
Menu Settings
and
Reports
pages.
Menu Settings
Purpose:
To display the current settings of the operator panel menus.
Values:
System Settings
Power Saver
Timer Mode 1
*1
Displays the amount of time before the printer enters the power
saver timer mode 1 after it finishes a print job.
Power Saver
Timer Mode 2
*1
Displays the amount of time before the printer enters the power
saver timer mode 2 after it finishes a print job.
Alert Tone
Displays whether the printer sounds an alarm when an error
occurs.
Time-Out
Displays specify the amount of time the printer waits to receive
additional bytes of data from the computer.
Panel Language
Displays the language of the text on the operator panel screen.
Auto Log Print
Displays whether the printer outputs logs automatically.
Print ID
Displays a location where the user ID is printed.
Summary of Contents for 3110 Color Laser
