specific jobs.)
NOTE:
Values marked by an asterisk (*) are the factory default menu settings.
NOTE:
The
2 Sided
menu is only available when the optional duplexer is installed on the printer.
Values:
2 Sided
Print
Off*
Prints on one side of the paper.
On
Prints on both sides of the paper.
Binding
Edge
Flip Long
Edge*
Assumes binding along the long edge of the page. (Left edge for portrait
orientation and top edge for landscape orientation)
Flip Short
Edge
Assumes binding along the short edge of the page. (Top edge for portrait
orientation and left edge for landscape orientation)
Font
Purpose:
To specify the default font from the registered fonts in the printer.
Values:
CG Times
CG Times It
CG Times Bd
CG Times BdIt
Univers Md
Univers MdIt
Univers Bd
Univers BdIt
Univers MdCd
Univers MdCdIt
Univers BdCd
Univers BdCdIt
AntiqueOlv
AntiqueOlv It
AntiqueOlv Bd
CG Omega
CG Omega It
CG Omega Bd
CG Omega BdIt
GaramondAntiqua Garamond Krsv
Summary of Contents for 3110 Color Laser
