36.
37.
Now the printer driver is setup correctly.
38.
Now go to
File
Page Setup
.
39.
Click the
Paper
Tab.
40.
Change Paper Size to Legal.
41.
Change the Paper source settings BOTH to "DEFAULT TRAY AS PER PRINTER".
42.
Click
OK
.
43.
Type in some gibberish in the body of the document and click Print!
44.
Setup printing Letter Plain 1 from Tray2
On the printer operator panel press
MENU
.
1.
Press
to get to
Tray Settings
.
2.
Press
to select
Tray Settings
.
3.
Press
to get to
Paper Size
. (ONLY ON 3x00cn)
4.
Press
to select
Paper Size
. (ONLY ON 3x00cn)
5.
Press
to get to
Tray 2
. (ONLY ON 3x00cn)
6.
Press
to select
Tray 2
. (ONLY ON 3x00cn)
7.
Using
and
, select the appropriate paper size (Letter). (ONLY ON 3x00cn)
8.
Press the middle button,
SELECT
, once Letter is displayed on the lower line, this puts a * by it. (ONLY
ON 3x00cn)
9.
Now we have the
Tray 2
Size set to Letter. (ONLY ON 3x00cn)
10.
Now press
MENU
to get back to
Tray Settings/Paper Size
.
11.
Press
to get to
Paper Type
.
12.
Press
to select
Paper Type
.
13.
Press
to get to
Tray 2
.
14.
Press
to select
Tray 2
.
15.
Using
and
,, select the appropriate paper type (Plain 1).
16.
Press
SELECT
, once Plain 1 is displayed on the lower line.
17.
Now we have the Tray 2 Type set to Plain 1.
18.
Now press
MENU
to get back to
Ready to Print
19.
20.
Summary of Contents for 3110 Color Laser
