application, you go
File
and then click the
Properties
button, you will get this same driver
properties window.
Open up Word and create a new document.
26.
Go to
File
.
27.
Select the
Dell Color Laser Printer
from the printers list
28.
Click the
Properties
button to the right.
29.
This brings up Driver Properties.
30.
Click on the
Paper Tray
Tab.
31.
Change the Paper Source to
MPF
.
32.
Click the
Paper
Tab.
33.
Select in
paper size
,
Transparency
.
34.
Select for
Output Size
,
Same as Paper Size
.
35.
Click
OK
.
36.
Click
Close
.
37.
Now the printer driver is setup correctly.
38.
Now go to
File
Page Setup
.
39.
Click the
Paper
Tab.
40.
Change Paper Size to Legal.
41.
Change the Paper source settings BOTH to "DEFAULT TRAY AS PER PRINTER".
42.
Click
OK
.
43.
Type in some gibberish in the body of the document and click Print!
44.
Setup printing Envelope from Multipurpose Feeder
On the printer operator panel press
MENU
.
1.
Press
to get to
Tray Settings
.
2.
Press
to select
Tray Settings
.
3.
Press
to get to
Paper Size
. (ONLY ON 3x00cn)
4.
Press
to select
Paper Size
. (ONLY ON 3x00cn)
5.
Press
to get to
MPF
. (ONLY ON 3x00cn)
6.
7.
8.
Summary of Contents for 3110 Color Laser
