18.
19.
Now insert the Letter-sized stack of paper into the
Tray 2
.
20.
On the screen
Tray 2/Letter
will appear. (ONLY ON 3x00cn)
21.
Press
SELECT
to confirm this. (ONLY ON 3x00cn)
22.
Now on the screen
Tray 2/Plain 1
will appear.
23.
Press
SELECT
to confirm this.
24.
We now have all the hardware settings on the printer correct
25.
Now, all software settings screen shots are from WORD, this was done in Word 2003. However if in any
application, you go
File
and then click the
Properties
button, you will get this same driver
properties window.
Open up Word and create a new document.
26.
Go to
File
.
27.
Select the
Dell Color Laser Printer
from the printers list
28.
Click the
Properties
button to the right.
29.
This brings up Driver Properties.
30.
Click on the
Paper Tray
Tab.
31.
Change the Paper Source to
Tray 2
.
32.
Click the
Paper
Tab.
33.
Select in
paper size
,
Letter
.
34.
Select for
Output Size
,
Same as Paper Size
.
35.
Click
OK
.
36.
Click
Close
.
37.
Now the printer driver is setup correctly.
38.
Now go to
File
Page Setup
.
39.
Click the
Paper
Tab.
40.
Change Paper Size to Legal.
41.
Change the Paper source settings BOTH to "DEFAULT TRAY AS PER PRINTER".
42.
Click
OK
.
43.
Type in some gibberish in the body of the document and click Print!
44.
1.
Summary of Contents for 3110 Color Laser
