Dell 3110 Color Laser User Manual Download Page 32

Page: 32 / 451

Gateway Address

Displays the gateway address.

IPv6 Use Manual Address

Displays whether to set the IP address manually.

Manual Address

Displays the IP address.

Stateless Address
1-3

Displays the stateless addresses.

Link Local Address

Displays the link local address.

Manual Gateway
Address

Displays the gateway address.

Auto Configure
Gateway Address

Displays the gateway address.

DNS *

IPv4 Get DNS Server

Address from DHCP

Displays whether to automatically get a DNS (Domain
Name System) server address from the DHCP (Dynamic
Host Configuration Protocol) server.

Current DNS Server
Address

Displays the DNS server address.

IPv6 Get DNS Server

Address from
DHCPv6-lite

Displays whether to automatically get a DNS server
address from the DHCPv6-lite server.

Current DNS Server
Address

Displays the DNS server address.

DNS Dynamic Update
(IPv4) *

Displays the status of the DNS Dynamic Update feature.

DNS Dynamic Update
(IPv6) *

Displays the status of the DNS Dynamic Update feature.

Auto Generate Search List

Displays whether to automatically generate a search list.

Search Domain Name

Displays the search domain name.

Time-out

Displays the time-out period.

Priority to IPv6 DNS
Name Resolution

Displays whether to use the DNS Name Resolution feature.

WINS

WINS Mode

Displays the setting of how to get the WINS server address.

WINS Primary Server

Displays the primary WINS server address.

WINS Secondary Server

Displays the secondary WINS server address.

LPD

Port Status

Displays the port status.

Connection Time-Out

Displays the connection timeout period.

Summary of Contents for 3110 Color Laser




































































































































































































































































































































































































































































Search results

Summary of Contents for 3110 Color Laser

Reviews:

Related manuals for 3110 Color Laser

Brands by name

Popular brands

Dell 3110 Color Laser, User Manual

Search results

Summary of Contents for 3110 Color Laser

Reviews:

Related manuals for 3110 Color Laser

Brands by name

Popular brands